Analog Clock

[Tyhm]

PHP Code:

if (playerenters||timeout) {
  showimg 0,insom_gui-watch.png,screenwidth-105,0;
  changeimgvis 0,4;

  temp.thp=(temp.thp-1)%1201;

  setarray temp.points,8;

  temp.cx=screenwidth-52;
  temp.cy=52;
  temp.h=30;
  temp.radian=(pi*temp.thp/50);
  temp.points[0]=temp.cx+(sin(temp.radian)*4);
  temp.points[1]=temp.cy+(cos(temp.radian)*4);
  temp.points[2]=temp.cx-(cos(temp.radian)*1);
  temp.points[3]=temp.cy+(sin(temp.radian)*1);
  temp.points[4]=temp.cx-(sin(temp.radian)*temp.h);
  temp.points[5]=temp.cy-(cos(temp.radian)*temp.h);
  temp.points[6]=temp.cx+(cos(temp.radian)*1);
  temp.points[7]=temp.cy-(sin(temp.radian)*1);
  showpoly 1,temp.points;
  changeimgvis 1,6;
  changeimgcolors 1,0.1,0.1,0.1,1;
  temp.h+=4;
  temp.points[0]=temp.cx+(sin(temp.radian)*5);
  temp.points[1]=temp.cy+(cos(temp.radian)*5);
  temp.points[2]=temp.cx-(cos(temp.radian)*2);
  temp.points[3]=temp.cy+(sin(temp.radian)*2);
  temp.points[4]=temp.cx-(sin(temp.radian)*temp.h);
  temp.points[5]=temp.cy-(cos(temp.radian)*temp.h);
  temp.points[6]=temp.cx+(cos(temp.radian)*2);
  temp.points[7]=temp.cy-(sin(temp.radian)*2);
  showpoly 2,temp.points;
  changeimgvis 2,5;
  changeimgcolors 2,0.5,0.5,0.5,0.25;

  temp.h=20;
  temp.radian=(pi*temp.thp/600);
  temp.points[0]=temp.cx+(sin(temp.radian)*4);
  temp.points[1]=temp.cy+(cos(temp.radian)*4);
  temp.points[2]=temp.cx-(cos(temp.radian)*2);
  temp.points[3]=temp.cy+(sin(temp.radian)*2);
  temp.points[4]=temp.cx-(sin(temp.radian)*temp.h);
  temp.points[5]=temp.cy-(cos(temp.radian)*temp.h);
  temp.points[6]=temp.cx+(cos(temp.radian)*2);
  temp.points[7]=temp.cy-(sin(temp.radian)*2);
  showpoly 3,temp.points;
  changeimgvis 3,6;
  changeimgcolors 3,0.1,0.1,0.1,1;
  temp.h+=4;
  temp.points[0]=temp.cx+(sin(temp.radian)*5);
  temp.points[1]=temp.cy+(cos(temp.radian)*5);
  temp.points[2]=temp.cx-(cos(temp.radian)*3);
  temp.points[3]=temp.cy+(sin(temp.radian)*3);
  temp.points[4]=temp.cx-(sin(temp.radian)*temp.h);
  temp.points[5]=temp.cy-(cos(temp.radian)*temp.h);
  temp.points[6]=temp.cx+(cos(temp.radian)*3);
  temp.points[7]=temp.cy-(sin(temp.radian)*3);
  showpoly 4,temp.points;
  changeimgvis 4,5;
  changeimgcolors 4,0.5,0.5,0.5,0.25;
  timeout=0.05;
} 


I'm sure a clever coder could make a for loop for the points, but I like it my way. Replace temp.thp with the number of minutes you wish to reflect. Adding a second hand is left as an exercise for the reader. (Hint: You could probably just increment temp.thp by 1/60.)