updateboard2 bug

[ZeLpH_MyStiK]

This is not a v4 bug, it is a gscript bug.
updateboard2 x,y,xlen,ylen;
When using updateboard2, anything with ylen greater than 1 will not save right. Only the first line seem to save right. This happens with v2 as well as v4 since the command is actually performed serverside. If Stefan can shed light on this problem, please do so.

While we're on the topic of level saving, why is it that different levels seem to save at different rates after using updateboard2. I've tested this using class npc zelph_test on #gscript, basically recursively setting a tile and using updateboard2 on it, and updating the level after an increasing amount of time until the tile actually saves.
shadowblaze_test.nw only took 1-2 minutes to save (it varied for some reason) while
cheetos_leveltest.nw took somewhere around 5-7 minutes to save.

[CheeToS2]

The way it saves seems very strange. If you put down the tiles and update the board, it looks fine, but after the level saves and is updated, the tiles are all mixed up. An example can be seen in cheetos_leveltest.nw near x/y 28, 10. The messed up tiles were originally a tree trunk until the level saved (you can see the script used in the block npc that is next to the trunk).

[Admins]

Ok I have checked, it was handling tile modifications of width!=2 incorrectly, need to update both npcserver and gserver, will upload those in a few minutes.

[CheeToS2]

Hooray, thanks

[ZeLpH_MyStiK]

nice now i dont have to do 1x1 updateboard2 in a loop

[ZeLpH_MyStiK]

It seems that updateboard2 no longer saves weird. Now it doesn't save at all.
Tested this several times on N-Pulse, after Stefan restarted the server on the 16th. Tried to save top left part of pics1.png. When tiles are placed, updateboard2 does update the level to show new tiles, however it does not save and upon return several minutes later, newly placed tiles disappear entirely.

[ZeLpH_MyStiK]

ping *Stefan

[Admins]

Ok fixed it, was not related to the size of the updateboard though
(fixed on npulse, will upload the gserver to the other machines, they need to be manually restarted).

[ZeLpH_MyStiK]

aah good good, thank you.