setting up UDP again.

EclipsedAngel · #1 02-09-2010, 11:11 PM

Ok so I set my modem to bridge mode, and I made my router open to port 14922
but it's still not working.

I forgot how I set this up.

The IP that's given to my computer for my router is 192.168.2.2 so I set the IP to that.

Inbound port and private port are both 14922. Type set to UDP.

I saw a page on graalonline.com that shows all the ports used on graal, but I forgot it. It was like 14xxx-15xxx or something.

When I get my UDP to work. If I open up 2 clients, my 2 character's x and y positions should be the same, and the characters will appear to overlap eachother, sharing the same X Y position, but instead the characters are frozen.

Hiro · #2 02-10-2010, 01:58 AM

the correct port is 14899

EclipsedAngel · #3 02-10-2010, 02:35 AM

I put it on that and it works thanks

Hiro · #4 02-10-2010, 06:36 AM

i'm glad that was the problem and not something more complex (:

EclipsedAngel · #5 02-17-2010, 05:04 AM

It still messes up a lot and I get errors. There really needs to be a more efficient UDP system on graal.

Hiro · #6 02-17-2010, 06:42 AM

i also get frequent UDP errors regardless of how correct my settings appear to be

EclipsedAngel · #7 02-22-2010, 07:53 AM

hopefully it will be updated but I doubt it.

EclipsedAngel · #8 04-11-2010, 01:14 AM

I've done everything to try to unblock the port but it's not working anymore.

When I enable UDP, all the other people using UDP can't see me anymore but I can see them. Why is this happening?

This is what I got on my router

http://img339.imageshack.us/img339/5650/ports.png

DustyPorViva · #9 04-11-2010, 01:29 AM

Quote:

Originally Posted by EclipsedAngel

I've done everything to try to unblock the port but it's not working anymore.

When I enable UDP, all the other people using UDP can't see me anymore but I can see them. Why is this happening?

This is what I got on my router

http://img339.imageshack.us/img339/5650/ports.png

Change the port in Graal to something else and try that?

EclipsedAngel · #10 04-11-2010, 01:34 AM

What's the range of ports that graal uses?

EclipsedAngel · #11 04-11-2010, 01:39 AM

Graal is being real stubborn and I tried everything. I tried unblocking my firewalls and it still doesn't work so I guess I give up.

I'm really annoyed by this though. Like I said 100 times before, you guys need to rescript the UDP connection system.

cbk1994 · #12 04-11-2010, 01:41 AM

What's the advantage to UDP anyway?

EclipsedAngel · #13 04-11-2010, 01:43 AM

Faster connection because UDP doesn't have to check info to make sure the packets aren't malformed. I think it's direct connection too basically.

I like using microphone sometimes too.
A few weeks back I heard some people on microphone so it works to some extent sometimes.
It seems to really give me trouble when I'm on a DSL connection.

DustyPorViva · #14 04-11-2010, 01:59 AM

Sadly either my modem or my Apartment complex(who I 'rent' internet from) block ports for me -_- Pretty much ALL ports are blocked, and forwarding ports with my router accomplishes nothing.

cbk1994 · #15 04-11-2010, 02:08 AM

Quote:

Originally Posted by DustyPorViva

Sadly either my modem or my Apartment complex(who I 'rent' internet from) block ports for me -_- Pretty much ALL ports are blocked, and forwarding ports with my router accomplishes nothing.

Sounds more like a double NAT issue.