Udp
 

The default setting for this to have it checked for "Don't use UDP for data packages" But people throw fits if you don't uncheck it because I am told that is the way its supposed to be. Yet the default option is to have it checked. However, when I have mine unchecked I get a error message that says my graal is running slow. Anyone know the specifics on when you are and aren't supposed to have it checked and why I get that error message when i uncheck it.

P.S. I have wireless cable.

Might have to forward your ports for Graal.

IIRC, when you disable UDP Graal falls back to TCP to transfer data. UDP is faster than TCP, but only because UDP skips certain data checks and handshaking in order to achieve that extra speed.

I had a lot of issues with UDP though. Namely, with UDP enabled, in some cases I'd enter a room with a bunch of players inside and see most players moving but one or two players standing completely still in the position that they were in when I entered the room. I couldn't hurt these players and with clientside damage they couldn't hurt me either.
When one of these "frozen" players entered the room after I was already inside their character would be shown stationary in the doorway, essentially trapping me in that room because I couldn't hurt them.
After being banned several times for "hacking" I made a video of the phenomenon and Era eventually made all their damage serverside, which meant frozen players could kill me now, but I still couldn't see them moving or shooting me and couldn't fight back.

Upgrading to cable and disabling UDP fixed the issue for me, but now I also occasionally get the "Your Graal is running slow..." error as well. My ping is usually between 250 and 400, but even during sessions where I have a consistently high ping the chance of the error appearing seems random. I think it may have to do with only the speed at which you are uploading your character's position?

P.S. "wireless cable" is an oxym0r0n. http://i.somethingawful.com/forumsys...ot-jerkbag.gif

Hardly. Wireless router, cable internet.

from what i've found you essentially have to do the follow procedures in order to make UDP work (on vista):

1) start menu> run > cmd
type in "ipconfig /all" and look at what it tells you for the connection you use for the internet. make sure you know the "IPv4" address, the "default gateway" and "domain name service" numbers
2) open your network connections and go into the properties of that connection. you want to edit the IPv4 connection settings with the ones you obtained in cmd. this sets your computer a static ID
3) open your network and go to your routers admin web page and ensure that you DNS servers are set up properly on the page, as i've found that just having it correct on the computer isn't enough sometimes.
4) go to "virtual servers" and add a new port to be forwarded. you want to forward "14899" through both TCP & UDP: name it "graal" or something, and set the IP to your static address you set earlier for IPv4
5) log on graal and press f3 for options. go to the "general" tab. check "use fixed port for UDP" it should be 14899 by default. then uncheck "don't use UDP for data packages" and restart graal

this usually fixes the problem, though i haven't tried it on wireless connections. you can also go back to your router web page and enable your router as a demilitarized zone (DMZ) so that all ports are open all the time, but this hasn't proven to me to fix UDP all the time. i've also found that using the "PFPortChecker" program and asking it to check that port 14899 is open for UDP before opening graal seems to prove to my router and computer and the graal servers that its open, and then i can see everyone move. if i don't do that, i usually end up seeing everyone but some people cannot see me unless they reconnect (which no one wants to do)

I have XP >_<

In Australia "Wireless" is its own type of internet, served straight from the ISP. I just did a Google search for "wireless internet" and all the results on the first page are from Australia so I guess it's not a popular option overseas?
Basically you get a USB thumbdrive sized wireless modem with a SIM card in it, and you plug it into your PC to connect to the internet via 3G cell phone towers, which currently have a max speed of 42mb/s (getting upgraded to 80mb/s soon) so about comparable to fiber internet speeds at a fraction of the cost of laying hundreds of thousands of miles of fiber cable. It seems like it'll become the popular option for internet here in the future, but generally the upload rates are very poor because of the nature of the service.

Some people here call it "wireless cable" or "wireless broadband" (including the ISPs themselves) because they associate those terms with the speed of the service, not the infrastructure.

SO THERE YOU HAVE IT.

Sorry, don't live in Australia. Point nullified.

However, I do know what wireless internet is... but it is never referred to as "wireless cable" or any of the sort here. It's typically called satellite. Cable is reserved for actual cable internet, DSL is reserved for DSL, broadband is for general high-speed terminology, and most of the time if you hear any sort of combination of those terms with wireless, it means "I've got cable internet hooked up to a wireless home network". Satellite just isn't popular enough over here to claim the "wireless" term yet.

it's still essentially following the same process

So are you on a router, Deo?

Yes, he's mentioned he has cable internet hooked up through a wireless router.

Not sure what to exactly do, but you have to go to your router's config page and forward your ports, I will try to find something to help you out finding it.

**Update**

This IP works for me, not sure if it will do the same for you.

But type this into your browser 192.168.1.1, it should take you to your routers config page (if it asks for a password its 'admin'), from there you forward 2 ports, 1 UDP and 1 TCP (Forward them to 14899).

If the IP isn't working when you type it into your browser, try telling us the brand of your router, or search it on the internet on how to get the the config setup of it.